Tag Archives: 68000

Cross compile for 68000 in C under Windows

This article contains my notes for setting up a m68k cross-compiler using Cygwin. It’s all free software and gives me a way to create binary images for a 68000 CPU from C code on Windows. Here’s the step-by-step to set it up:

Step 1. Install Cygwin

Go to http://www.cygwin.com/ and download setup.exe. Run it.

During the setup, you will have the opportunity to select what packages to install. Choose the following:

  • binutils
  • gcc-core
  • bzip2
  • flex
  • make

Step 2. Download the compiler source code

You want binutils and gcc-core from GNU. Go to the GNU download page, choose a mirror and download the following files. Place them in your Cygwin home directory.

  • binutils-2.15.tar.bz2
  • gcc-core-3.4.2.tar.bz2

Yes there are more up-to-date versions but at the time of writing, the latest gcc versions do not support the 68000 platform. Feel free to try different versions but I know the versions just mentioned will work.

Step 3. Compile and install binutils

Launch Cygwin and type the following commands. Typing this kind of stuff is automatic for me these days. Its a pretty standard GNU setup procedure.

mkdir /usr/local/m68k

tar jxvf binutils-2.15.tar.bz2

cd binutils-2.15/

./configure --prefix=/usr/local/m68k --target=m68k-coff

make install

Step 4. Compile and install gcc

Same again for the C compiler.

cd ~

export PATH=$PATH:/usr/local/m68k/bin

tar jxvf gcc-core-3.4.2.tar.bz2

cd gcc-core-3.4.2/

./configure --prefix=/usr/local/m68k --target=m68k-coff --enable-languages=c

make install

Step 5. Set up your path

The 68000 compiler will be located in /usr/local/m68k/bin. To make life easier, you might like to add the following to your ~/.bashrc file:

export PATH=$PATH:/usr/local/m68k/bin

Step 6. Enjoy

Here’s the command to compile some C code:

m68k-coff-gcc -o test.out test.c

And the command to create a binary image from the compiled code:

m68k-coff-objcopy -O binary test.out test.bin